WXD3-13-2W 10K Multi-Turn Precision Wirewound Potentiometer

Superway WXD3-13-2W 10K Multi-Turn Precision Wirewound Potentiometer

The Superway WXD3-13-2W 10K Multi-Turn Precision Wirewound Potentiometer is a precision adjustable resistor designed for applications that require smooth, controlled, and accurate resistance adjustment. Featuring a 10KΩ nominal resistance, 2W rated power, and a 10-turn rotary adjustment mechanism, this potentiometer is suitable for electronic circuits where precise setting and repeatable adjustment are important.

Unlike a standard single-turn potentiometer, the WXD3-13-2W provides approximately 10 complete rotations, allowing the user to make fine adjustments over the entire resistance range.WXD3-13-2W 10K Multi-Turn Precision Wirewound Potentiometer  This multi-turn design is particularly useful in applications where a small change in shaft position needs to produce a controlled change in resistance. It can be used for calibration, tuning, voltage adjustment, speed control, temperature settings, timer circuits, and other electronic control applications.

The Superway WXD3-13-2W 10K Potentiometer uses a wirewound precision construction and is designed for reliable operation in electronic and industrial equipment. The WXD3-13 series is available across a resistance range of approximately 100Ω to 100KΩ, with the 10KΩ version being one of the commonly available resistance values. The typical resistance tolerance is ±5%, while the series datasheet specifies linearity of approximately ±0.5%.

The 10KΩ resistance value makes this potentiometer useful for a wide variety of analog control and adjustment circuits. Depending on the circuit design, it can be used as a variable voltage divider or as an adjustable resistance element. WXD3-13-2W 10K Multi-Turn Precision Wirewound Potentiometer The three electrical terminals allow the component to be configured as a potentiometer or, when appropriate, as a variable resistor using the wiper and one end terminal.

The multi-turn mechanism is one of the main advantages of the WXD3-13-2W 10K Precision Potentiometer. With approximately 3600° of total mechanical travel, the component provides a much finer adjustment compared with a conventional single-turn potentiometer. This makes it particularly useful for applications where precise calibration is required. The datasheet specifies a total mechanical travel of 3600° ±10°, while the effective electrical travel is specified at approximately 3600° with the stated tolerance.

The 2W power rating makes the WXD3-13-2W suitable for circuits that require greater power-handling capability than typical small signal potentiometers. WXD3-13-2W 10K Multi-Turn Precision Wirewound Potentiometer The series documentation specifies 2W at 70°C, with the permissible power decreasing as temperature increases and reaching 0W at 125°C. Some retail listings specify 2W at 85°C, so the exact power derating should be checked against the datasheet for the particular manufacturer and variant being supplied.

The potentiometer is suitable for a wide range of electronic adjustment applications. It can be used for timer adjustment, where the resistance value controls timing parameters in an electronic circuit. It can also be used for motor speed adjustment, provided the potentiometer is used as part of an appropriate control circuit rather than directly handling motor current. Other possible uses include temperature control, voltage adjustment, calibration, test equipment, instrumentation, and electronic control systems.

For industrial electronics and instrumentation, the multi-turn adjustment mechanism allows technicians and engineers to set a desired operating point more accurately. This can be useful when calibrating equipment or adjusting circuit parameters that need fine control. The wirewound construction also provides a predictable resistance adjustment characteristic suitable for precision applications.

The Superway WXD3-13-2W 10K is also useful for electronics repair and replacement applications. If an existing equipment panel or PCB uses a WXD3-13 series multi-turn potentiometer, this component may be considered as a replacement when the resistance value, mechanical dimensions, shaft configuration, terminal arrangement, and electrical specifications match the original component.

Before ordering a replacement potentiometer, it is important to verify the resistance value, tolerance, shaft length, shaft type, mounting method, terminal configuration, body dimensions, and power rating. WXD3-13 series variants may be supplied with different shaft lengths and mechanical configurations. Some manufacturers also offer customized shaft options, including different shaft lengths and shaft styles.

The WXD3-13 series offers a wide nominal resistance range from approximately 100Ω to 100KΩ, making the series suitable for many different adjustment requirements. Common resistance values include 100Ω, 220Ω, 470Ω, 1KΩ, 2.2KΩ, 4.7KΩ, 10KΩ, 22KΩ, 47KΩ, and 100KΩ. The 10KΩ version is identified by the appropriate resistance code in the series ordering system.

The temperature characteristics of the WXD3-13 series also make it suitable for demanding electronic environments. The series datasheet specifies an operating temperature range of approximately -55°C to +125°C and a resistance temperature coefficient of approximately ±100 ppm/°C. These specifications should be considered when the potentiometer is used in equipment exposed to significant temperature variations.

The component also offers a high insulation resistance and specified dielectric withstand characteristics. The series datasheet specifies insulation resistance of at least 1GΩ under the stated test conditions. These characteristics support reliable use in suitable electronic circuits, although the exact application must always remain within the manufacturer’s electrical and environmental specifications.

The Superway WXD3-13-2W 10K Multi-Turn Potentiometer can be used in a variety of applications including electronic instruments, laboratory equipment, control panels, industrial equipment, power supply adjustment circuits, motor-control systems, timer circuits, temperature-control systems, and DIY electronics projects.

Its precision multi-turn design makes it especially useful when a user needs more adjustment resolution than a standard single-turn potentiometer can provide. Instead of changing the resistance significantly with a small shaft movement, the multi-turn mechanism spreads the adjustment over approximately ten rotations. This allows users to fine-tune the desired resistance or voltage setting more easily.

For DIY electronics and prototyping, the WXD3-13-2W can be used in circuits where a 10KΩ variable resistance is required.WXD3-13-2W 10K Multi-Turn Precision Wirewound Potentiometer It may be suitable for analog signal adjustment, calibration, reference voltage settings, and other low-to-medium power control applications. The actual circuit configuration should determine whether the potentiometer is used as a voltage divider or variable resistor.

For electronic repair technicians, the component can be a useful replacement option for compatible multi-turn wirewound potentiometers. Its 10KΩ value and 2W power rating make it suitable for a variety of adjustment circuits, but the technician should always compare the original component’s specifications before replacement.

Overall, the Superway WXD3-13-2W 10K Precision Potentiometer combines a 10-turn adjustment mechanism, wirewound construction, 10KΩ resistance, and 2W power capability in a compact adjustable component. It is a practical choice for precision resistance adjustment, calibration, tuning, instrumentation, industrial electronics, and electronic repair applications.

Key Features

• 10KΩ nominal resistance
• 2W rated power under specified conditions
• 10-turn multi-turn adjustment
• Wirewound precision construction
• ±5% typical resistance tolerance
• Approximately ±0.5% linearity for the series
• Approximately 3600° total mechanical rotation
• Resistance range available from approximately 100Ω to 100KΩ
• Fine and precise adjustment
• Suitable for calibration and tuning
• Designed for through-hole mounting
• Suitable for electronic and industrial applications
• Available in different mechanical configurations depending on variant
• Suitable for timer, speed, temperature, and voltage adjustment application